FEULING PARTS - 7272 - Camchest Kit - 487 - Chain Drive - Oil Cooled - Race Series Lifters - M8
The FEULING PARTS 7272 is purpose-built hardware for Camchest Kit - 487 - Chain Drive - Oil Cooled - Race Series Lifters - M8 applications precision-manufactured for a correct fit and reliable performance. Sold as a complete kit.
Features
- 487 Reaper® Chain Drive Camshaft, Cam Installation Kit, Race Series Lifters, One Piece Pushrod, Race Series® Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit
- 487 Reaper Camshaft
- Chain Drive
- 38° overlap
- RPM range 2,250 - 6,100
- Camshaft for 114" and 117" engine
- Responds very well to increased bore and or compression
- Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock
- Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio
- Cam Installation Kit
- Includes cam bearing, cam/crank hardware and gasket/O-ring kit
- Race Series® Lifters
- Full-travel hydraulic lifters made from machined steel designed with 0.200" of travel
- One Piece Pushrod
- HP+ heavy duty 7/16 diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish
- Race Series® Oil Pump
- High flow 2.250 Chrome Moly gerotor gears
- 27% more pressure and scavenge gear volume over stock
- 42% more scavenge volume with matched passages, port sizing and holes to the engine case
- 46% more oil volume to the crankshaft and connecting rod bearing
- 15°- 25° cooler engine temperatures
- 15°- 30° cooler oil temperatures
- 10-30 more PSI of oil pressure
- Reduces wet sumping, blow by and oily air cleaners
- Magnets to help protect gears and pressure relief valve
- FEULING test results show a 50% reduction of engine sump oil level.
- High Flow Camplate
- Rear wheel power gains of 2 horsepower and 2 ft. lb. of torque can be achieved
- Made in the USA
- Feuling does not recommend tuning beyond stock emissions standards.
Specs
- Grind: 487 Series
- Intake Close: 37°
- Application: Oil Cooled
- Exhaust Close: 17.5°
- Exhaust Lobe Centerline: 103.25°
- Intake Lift: 0.478"
- Units: Kit
- Intake Open: 20.5°
- Intake Lobe Centerline: 98.5°
- Model: Reaper
- Riding Style: Street
- Product Name: Camchest Kit
- Exhaust Duration: 241.5°
- Exhaust Open: 44°
- Intake Duration: 237°
- Type: Chain Drive
- Exhaust Lift at TDC: 0.146"
- Exhaust Lift: 0.487"
- Intake Lift at TDC: 0.180"
Frequently Asked Questions - FEULING PARTS - 7272 - Camchest Kit - 487 - Chain Drive - Oil Cooled - Race Series Lifters - M8
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
