Foot Brake Levers & Pedals

About Foot Brake Levers & Pedals

A foot brake pedal is the control under your boot that applies the rear brake on machines that have one. It sits low, so it takes hits from rocks and ruts, and pedal tips bend and wear.

This is a small category with mixed listings. A blue brake pedal listed for Sherco and a polished kick starter lever for the Honda ATC250R and TRX250R are shown, and so is a Mud Axe, a scoop, scraper and pick tool. Pedals and kick starters are made for particular models and years, so confirm the fit in the listing. After fitting a brake pedal, check the height against the manual, make sure it springs back fully, and test the brake at low speed.

Brands here are Risk Racing, Moose Offroad and ModQuad. Related controls are in Hand Brake Levers, Shift & Gear Levers and Throttle Controls, all part of Hand & Foot Controls.

FAQs on foot brake pedals

Does a foot brake pedal have to match my exact machine?

Yes. The pivot, shape and mounting differ between machines, so choose a pedal listed for your make, model and year. A pedal that only looks similar can sit at the wrong height or fail to spring back properly.

What is a kick starter lever for?

A kick starter is a lever you push down with your foot to turn the engine over on machines that have one. It is listed by model, such as the Honda ATC250R and TRX250R, so check that it matches yours.

How do I check the pedal after installing a new one?

Compare the pedal height with the manual, press it to confirm that it moves smoothly and springs back fully, and check that the brake does not drag. Test the brake at low speed in a safe area before riding normally.

Should I replace a bent foot brake pedal?

Replace it rather than bending it back. A part that has been bent once can crack when bent again, and a failed brake pedal leaves you with less braking. Check that the replacement is listed for your model and year.