Lenses
About Lenses
A lens is the cover over a light. When it cracks, fades or yellows, it lets water in and lets less light out, and replacing it can restore the light without replacing the whole assembly. Riders also swap lenses to change the look, for example from red to smoke, or from clear to amber.
Lenses are made for a particular light, so match the shape and size rather than guess. The samples include taillight lenses in red and smoke, laydown and mini-deuce style kits, turn signal lenses in clear and white, visor-style bezel and lens sets in red and amber, an amber spot light lens, and lens kits for Harley-Davidson and Indian models. Color is not only cosmetic. A taillight lens is normally red, and the right color for a signal lens depends on its position and on local lighting rules, so check before you change it. Look at how the lens fastens, and whether a seal or screws are included.
Brands in this category include HERETIC, HardDrive, Drag Specialties, Parts Unlimited and Custom Dynamics. A whole light is in Tail & Brake Light Assemblies or Turn Signal Light Assemblies, and replacement bulbs are in Light Bulbs & LEDs. Pick your bike in the Ride Finder at the top of the page. The whole group is Lighting & Lamps.
FAQs on motorcycle light lenses
Can I replace just the lens on a motorcycle light?
Yes, if the housing and the bulb socket are in good condition and the lens is listed for your light. Remove the old lens carefully, clean the mating surface and fit the new lens with its seal. If the housing is cracked or corroded, replace the whole light.
Does lens color change the light color?
A colored lens filters the light of the bulb behind it, so a red lens on a white bulb gives red light. A smoke lens reduces how much light gets out. Check local lighting rules before changing the color or using a smoke lens on lights your bike is required to have.
How do I keep water out of a new lens?
Fit the lens with its gasket or seal in place, if one comes with it, and tighten the screws evenly without overtightening, which can crack the plastic. If the old seal is damaged, replace it, and check the light for moisture after the first wet ride.
How do I clean a cloudy or scratched lens?
Wash it with mild soap and water and a soft cloth, and use a plastic polish on light scratches. Deep cracks or heavy yellowing mean the lens should be replaced. Avoid harsh solvents, which can craze the plastic and cloud the lens further.
Will a lens fit different brands of lights?
Usually not. Lenses are cut to fit particular housings and styles, so choose by the light's model name, shape and the bike it was made for. If you do not know which light you have, look for markings on the housing or the old lens.