FEULING PARTS - 7273ST - Camchest Kit - 487 - Center/Water Cooled - Race Series Short Travel Lifters - M8
The FEULING PARTS 7273ST is purpose-built hardware for Camchest Kit - 487 - Center/Water Cooled - Race Series Short Travel Lifters applications precision-manufactured for a correct fit and reliable performance. Sold as a complete kit.
Features
- 487 Reaper® Chain Drive Camshaft, Cam Installation Kit, Race Series® Sort Travel Lifters, One Piece Pushrod, Race Series® Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit
- 487 Reaper Camshaft.
- Bolt-in
- Chain Drive
- Camshaft for 114" and 117" engine
- Responds very well to increased bore and or compression
- Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock
- RPM range 2,250 - 6,100
- 38° overlap
- Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
- Cam Installation Kit
- Includes cam bearing, cam/crank hardware and gasket/O-ring kit
- Race Series® Short Travel Lifters
- Short travel hydraulic roller lifters, standard OD (0.8420-0.8423)
- Designed with 0.115 of total travel
- One Piece Pushrod
- HP+ 0.165 wall, +0.040 longer
- Heavy duty 7/16" diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish
- Race Series® Oil Pump
- Increase oil pressure, scavenge volume and engine oil flow
- 30% more pressure gear volume over stock
- 53% more scavenge gear volume over stock
- 42% more scavenge volume with port sizing, matched passages and holes to the engine case
- 46% more oil volume to the crankshaft and connecting rod bearing
- 15°- 25° cooler engine temperatures
- 15°- 30° cooler oil temperatures
- 10-30 more PSI of oil pressure
- Reduces wet sumping, blow by and oily air cleaners
- Magnets in oil pump to help protect gears and pressure relief valve
- Rear wheel power gains of 2 horsepower and 2 ft. lb. of torque are achieved.
- FEULING test results show a 50% reduction of engine sump oil level.
- High Flow Camplate
- Bolts into stock location
- Billet 7075 aluminum
- Made in the USA
- Feuling does not recommend tuning beyond stock emissions standards.
Specs
- Exhaust Close: 17.5°
- Product Name: Camchest Kit
- Type: Chain Drive
- Units: Kit
- Exhaust Open: 44°
- Intake Open: 20.5°
- Exhaust Lobe Centerline: 103.25°
- Exhaust Lift at TDC: 0.146"
- Grind: 487 Series
- Intake Duration: 237°
- Intake Lift at TDC: 0.180"
- Exhaust Duration: 241.5°
- Features: Short Travel Lifters
- Application: Water Cooled
- Exhaust Lift: 0.487"
- Intake Lift: 0.478"
- Intake Lobe Centerline: 98.5°
- Intake Close: 37°
- Model: Reaper
- Riding Style: Street
Frequently Asked Questions - FEULING PARTS - 7273ST - Camchest Kit - 487 - Center/Water Cooled - Race Series Short Travel Lifters - M8
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
