S&S CYCLE - 33-5269 - Camshaft Kit - 625G - Gear Drive - Twin Cam
The S&S CYCLE 33-5269 is a purpose-built camshaft kit designed and tested to perform correctly in the conditions and applications it was made for. For 95/96/103 and 110 cubic inch engines with compression ratios from 10.0 to 10.75:1. Strongest from 3000-6000 rpm, giving you a level of quality that holds up across the full service life of the component. Increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive. Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes, as a result, higher cam lifts are possible. Material must be removed from inner surface of the stock gear cover to install. For riders who know the difference quality components make, the 33-5269 is the right call. Sold as a complete kit.
Features
- For 95/96/103 and 110 cubic inch engines with compression ratios from 10.0 to 10.75:1
- Strongest from 3000-6000 rpm
- Increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes, as a result, higher cam lifts are possible
- Material must be removed from inner surface of the stock gear cover to install
- A hydraulic press and other professional level tools are required to install the kit
- High lift valve springs and adjustable pushrods required
- Camshaft bearings and gaskets must be replaced when installing new camshafts
- Kit includes camshafts, inner gear, outer drive gears, inner, outer bearings, gasket and instructions
- Made in the USA
- Installer must check coil bind, valve to valve clearance and valve to piston clearance.
- Due to inherent characteristics of gear drives, you may experience more valve train noise.
Specs
- Intake Close: 55°
- Product Name: Camshaft Kit
- Application: Exhaust
- Exhaust Open: 60°
- Intake Duration: 255°
- Intake Lift: 0.625”
- Intake Lobe Centerline: 107.5°
- Intake Open: 20°
- Type: Gear
- Exhaust Lift: 0.625”
- Units: Kit
- Exhaust Duration: 260°
- Color/Finish: Raw
- Exhaust Lift at TDC: 0.184”
- Exhaust Lobe Centerline: 110°
- Grind: 625 Series
- Riding Style: Street
- Intake Lift at TDC: 0.189”
- Exhaust Close: 20°
- Application: Intake
Frequently Asked Questions - S&S CYCLE - 33-5269 - Camshaft Kit - 625G - Gear Drive - Twin Cam
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
