S&S CYCLE - 33-5268 - Camshaft Kit - 585G - Gear Drive -Twin Cam
For riders who demand quality in every component, the S&S CYCLE 33-5268 is a camshaft kit built to the standards that experienced powersports enthusiasts recognize the moment they put it in their hands. Designed for 88/96/103/110 cubic-inch engines with compression ratios from 10.0:1 to 10.5:1. Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts possible, giving you a level of quality that holds up across the full service life of the component. Increases valve timing accuracy by eliminating chain lash and loosely fit stock chain drive. Material must be removed from inner surface of the stock gear cover to install. 3500-6000 rpm for 88” to 103” engines and 2500-5500 rpm for larger engines. Whatever the application demands, the 33-5268 gives you a component built to meet it. Sold as a complete kit.
Features
- Designed for 88/96/103/110 cubic-inch engines with compression ratios from 10.0:1 to 10.5:1
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts possible
- Increases valve timing accuracy by eliminating chain lash and loosely fit stock chain drive
- Material must be removed from inner surface of the stock gear cover to install
- 3500-6000 rpm for 88” to 103” engines and 2500-5500 rpm for larger engines
- A hydraulic press and other professional level tool are required for installation
- S&S recommends that adjustable pushrod/cover get be used
- Cam bearings and gaskets must be replaced when installing new cams
- Kit includes camshafts, inner gears, outer gears, inner bearings, outer bearings, gasket and instructions
- Installer must check coil bind, valve to valve clearance and valve to piston clearance.
- Due to the inherent characteristics of gear drives, more valve train noise may occur.
- Made in the USA
Specs
- Application: Exhaust
- Exhaust Open: 60°
- Exhaust Duration: 260°
- Grind: 585 Series
- Intake Close: 45°
- Units: Kit
- Exhaust Lift: 0.585”
- Exhaust Lobe Centerline: 110°
- Intake Duration: 245°
- Intake Open: 20°
- Riding Style: Street
- Exhaust Lift at TDC: 0.179”
- Product Name: Camshaft Kit
- Application: Intake
- Intake Lift at TDC: 0.186”
- Intake Lift: 0.585”
- Exhaust Close: 20°
- Intake Lobe Centerline: 102.5°
- Type: Gear
Frequently Asked Questions - S&S CYCLE - 33-5268 - Camshaft Kit - 585G - Gear Drive -Twin Cam
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
