Frames & Subframes
About Frames & Subframes
A frame is the backbone of a UTV or ATV, and the parts here support or protect it. Owners shop for a frame support when one is bent or cracked, and for frame guards to keep boots, brush and debris from scuffing the tubes.
The listings are few and show two types. A rear frame support is a structural part listed for a specific machine and year range, such as the Yamaha Rhino. Frame guards are listed for ATVs such as the TRX 450R and YFZ 450 and cover areas of the frame that take wear. Match the part to the exact model and year. Frame parts carry load, so installing one is not a place to improvise: use the hardware and procedure the manufacturer gives, and have a qualified shop inspect a frame that is bent or cracked.
Brands here include Maier and Lone Star Racing/Tech 5 Ind. Related groups are Roll Cages and Fenders. The parent group is Body Parts, Doors & Fenders.
FAQs on UTV and ATV frame parts
What are frame guards for?
Frame guards cover sections of the frame tubes that take wear from boots, brush and rocks, which helps keep the finish from being scuffed away. They are made for specific ATVs, so check the model and year in the listing.
Can I weld a cracked frame?
Frame welding is skilled work, and a poor repair can fail under load. A qualified fabricator or shop should decide whether a section can be repaired, and the manufacturer's guidance applies. Replacing the part is often the safer route.
How can I tell if frame damage is serious?
Look for cracks near welds and mounts, bent or kinked tubes, and misaligned parts. Signs include crooked steering, uneven tire wear or a machine that tracks to one side. Do not ride until a qualified shop has inspected it.
How do I find the right frame support for my machine?
Frame parts are listed by model and year, such as a rear frame support for the 2004 to 2012 Yamaha Rhino. Match both exactly, and pick your machine in the Ride Finder at the top of the page to see parts made for it.