Handlebars & Mirrors
About Handlebars & Mirrors
Handlebars, risers and mirrors decide how a snowmobile feels at the grips: how far you reach, how tall you stand, and what you can see behind. Riders change them to fit a taller body, to stand up more comfortably on deep snow, or to replace a bent bar, a cracked mirror or a worn throttle part.
Riser blocks, such as the 2 inch and 4 inch blocks listed here, raise the bar without changing the bar itself. Raising it can make the throttle cable and brake line too short, which is why extension throttle cables are sold, so turn the bars fully left and right with the cable in place before you ride.
A new bar, like the Slim Jim shape, must fit your sled's steering post clamp. Throttle levers with a warmer add heat but draw power from the sled's electrical system. Universal mirrors are not model-specific, so confirm the mount suits your bar or panel. Steering block kits and throttle cables are matched to the make and year.
Brands in this category include Atlantis, CFR, ODI, Cipa and SPG. Taller bars can change which lines and cables you need, so see Brakes and Gauges & Cables, and Seats for the rest of your riding position. Pick your sled in the Ride Finder at the top of the page for parts that fit.
FAQs on snowmobile handlebars and risers
What does a snowmobile handlebar riser do?
A riser raises the handlebar, which brings the grips higher and closer to a standing rider. The blocks here are 2 inch and 4 inch. Because the bar moves, the throttle cable, brake line and wiring may need more length, so check the slack through full steering lock.
Do I need a longer throttle cable after raising my bars?
Often, yes. Turn the bars fully to both sides and check that the cable does not pull tight and that the idle does not change. If it does, an extension or longer cable is needed. Never ride with a cable that can hold the throttle open.
How do I choose a snowmobile handlebar shape?
Bar height and sweep set how far you reach and where your hands sit when standing. Taller bars usually suit standing riders and deep snow. The bar also has to fit the steering post clamp and your cables, so check the listing's make and model.
Will a universal mirror fit any snowmobile?
A universal mirror is not made for one model, so you must check that its mount suits your handlebar or panel and that you can see behind you without leaning. Check the mount type and the position in the listing before you buy.
Do heated levers use the snowmobile's battery or charging system?
Heated controls draw current from the sled's electrical system, so compare their draw with the charging output in your manual, particularly if you add other accessories. The listing and the heater's instructions should say how it is wired.
