S&S CYCLE - 330-0107 - Camshaft Kit - 583G - Gear Drive - Twin Cam
The S&S CYCLE 330-0107 is a purpose-built camshaft kit designed and tested to perform correctly in the conditions and applications it was made for. Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes, making higher cam lifts possible. Increase valve timing accuracy by eliminating timing chain lash and loosely fit stock chain, giving you a level of quality that holds up across the full service life of the component. Provides strong low end torque and horsepower. Strongest from 1500-5000 rpm. Material must be removed from inner surface of the stock gear cover to install. For riders who know the difference quality components make, the 330-0107 is the right call. Sold as a complete kit.
Features
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes, making higher cam lifts possible
- Increase valve timing accuracy by eliminating timing chain lash and loosely fit stock chain
- Provides strong low end torque and horsepower
- Strongest from 1500-5000 rpm
- Material must be removed from inner surface of the stock gear cover to install
- A hydraulic press and other professional level tools are required for installation
- Cam bearings and gaskets must be replaced
- S&S recommends that adjustable pushrod/cover kit be used (sold separately)
- Kit includes camshafts, inner gears, outer drive gears, inner, outer bearings, gasket and instructions
- Made in the USA
- Due to inherent characteristics of gear drives, more valve train noise maybe heard.
- Installer must check coil bind, valve to valve clearance and valve to piston clearance.
- Not recommended for engines having compression ratios greater the 10.1:1.
Specs
- Application: Intake
- Grind: 583 Series
- Intake Duration: 203°
- Intake Lift at TDC: 0.113”
- Intake Open: 5°
- Exhaust Open: 58°
- Application: Exhaust
- Exhaust Lift at TDC: 0.206”
- Exhaust Duration: 262°
- Exhaust Lobe Centerline: 107°
- Intake Lobe Centerline: 96.5°
- Intake Lift: 0.583”
- Product Name: Camshaft Kit
- Exhaust Lift: 0.583”
- Intake Close: 18°
- Riding Style: Street
- Type: Gear
- Exhaust Close: 24°
- Units: Kit
Frequently Asked Questions - S&S CYCLE - 330-0107 - Camshaft Kit - 583G - Gear Drive - Twin Cam
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
