S&S CYCLE - 106-5234 - Camshaft Kit - Easy Start - 570 Chain Drive - Twin Cam '07-'17 | Dyna '06
Every powersports drivetrain is only as reliable as the chain holding it together, and the S&S CYCLE 106-5234 is a 570 chain built to stay tight, resist stretch, and handle the punishment of serious riding across its full run. Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance. Designed for 88”/95”/103” engines with compression ratios between 9.0:1 and 10.0:1, ensuring strong pin retention. Power increase across entire power band from 3200 rpm - 5700 rpm, and includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions give this chain the internal toughness to resist constant flex and impact loads. Made in the USA. Whether running a practice bike, race machine, or trail bike, the 106-5234 delivers consistent performance. Sold as a complete kit.
Features
- Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- Designed for 88”/95”/103” engines with compression ratios between 9.0:1 and 10.0:1
- Power increase across entire power band from 3200 rpm - 5700 rpm
- Bolt-in
- Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions
- Made in the USA
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- Not for models with OEM compression releases.
Specs
- Intake Duration: 240°
- Product Name: Camshaft Kit
- Units: Kit
- Application: Exhaust
- Intake Open: 20°
- Intake Lift at TDC: 0.187”
- Exhaust Lift at TDC: 0.179”
- Intake Close: 40°
- Exhaust Close: 20°
- Intake Lift: 0.570”
- Riding Style: Street
- Type: Chain
- Exhaust Duration: 250°
- Exhaust Lift: 0.570”
- Exhaust Lobe Centerline: 107.5°
- Exhaust Open: 55°
- Grind: 570 Series
- Model: Easy Start
- Application: Intake
- Intake Lobe Centerline: 100°
Frequently Asked Questions - S&S CYCLE - 106-5234 - Camshaft Kit - Easy Start - 570 Chain Drive - Twin Cam '07-'17 | Dyna '06
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
