MAGNUM SHIELDING - 46846SW - E-Z Align Braided Single Disc Front Brake Line - '14-'21 Harley-Davidson Sportster 1200 Custom, Forty-Eight Special, SuperLow 1200T
The 46846SW uses an E-Z Align rotating caliper banjo so the fitting, not the hose, absorbs any misalignment when Magnum Shielding's single-disc front line goes on built to fit '14-'21 Harley-Davidson models, eliminating the kinks a fixed banjo can cause. Housing length runs from the master-cylinder banjo hole center to the flat of the caliper-side 90-degree bend, with 7/16" or 10mm fittings in 90, 180, 35, or 60-degree bends. It works as an alternate-length line for non-ABS models except '04+ Sportsters.
Features
- Housing length is measured from the center of the banjo hole at the master cylinder to the flat part of the 90° at the caliper
- E-Z Align rotating caliper banjo feature allows for perfect no-kink fitments
- Fittings offered are in 7/16" or 10 mm sizes, with 90°, 180°, 35°, and 60° degree bends. The caliper banjo will be a 90°or a 60° 10 mm E-Z Align rotating caliper banjo
- Works as alternate length line for all non-ABS models (except '04+ Sportsters)
Specs
- Color/Finish: Black Pearl
- Riding Style: Street
- Type: Alternate Length
- Color/Finish: Black
- Units: Each
- For Braking System: without ABS
- Lower Banjo Fitting: 3/8" 60° Banjo Fitting
- Model: E-Z Align Series
- Mounting Position: Front
- Length: 46"
- Product Name: Brake Line
- Upper Banjo Fitting: 10 mm 35° Banjo Fitting
- Material: Stainless Steel
Frequently Asked Questions - MAGNUM SHIELDING - 46846SW - E-Z Align Braided Single Disc Front Brake Line - '14-'21 Harley-Davidson Sportster 1200 Custom, Forty-Eight Special, SuperLow 1200T
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.