FEULING PARTS - 7196 - Oil Pump with Cam Plate - HP+ - Oil Cooled - M8
Don't settle for stock timing in your M8 performance build the FEULING PARTS 7196 delivers the cam profile you need. From the HP+® series, this cam is designed to drop into the factory valve train stack-up with minimal disruption to the surrounding components. Increase oil pressure, oil volume, engine oil flow and return oil scavenging. Quieter and smoother engine operation. Made in the U.S.A. Sold as a complete kit.
Features
- Increase oil pressure, oil volume, engine oil flow and return oil scavenging
- Quieter and smoother engine operation
- Engine temperatures run 15°-25° cooler
- Oil temperatures run 15°-30° cooler
- 10-30 lbs more psi of oil pressure
- Reduces wet sumping, blow by and oily air cleaners
- Test results show 2 horsepower gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight
- Includes a billet 6061 aluminum high-volume oil pump and FEULING® High Flow billet camplate made from 7075 aluminum; which is 50% harder and stronger than the factory or FEULING® OE+ camplates
- Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
- Oil pumps are bench-tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi
- Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
- FEULING® oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems
- FEULING® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal
- Made in the USA
- FEULING® test results show as much as 50% reduction of engine sump oil level.
- Optional Camplate/oil pump fastener kit PART #2401-0993 available separately.
- M-Eight oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.
Specs
- Color/Finish: Red
- Units: Kit
- Features: Oil Cooled
- Model: HP+®
- Style: Chain Drive
- Material: 6061 Billet Aluminum
- Style: Gear Drive
- Type: Oil
- Product Name: Pump Kit
- Riding Style: Street
Frequently Asked Questions - FEULING PARTS - 7196 - Oil Pump with Cam Plate - HP+ - Oil Cooled - M8
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
