FEULING PARTS - 1207 - Valve Spring Kit - High Load Beehive with TI Retainers - M8
Properly engineered spring kit hardware makes the difference. The FEULING PARTS 1207 is that hardware for M8. Valve configuration. Made in the U.S.A. Valve springs are a direct bolt-in replacement, no spring seat or rocker cover machining required up to 0.565 lift. Springs will accommodate over 0.cam lift, but will require spring seat pocket machining on the cylinder heads to set correct spring open height. Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics. Sold as a set.
Features
- Machined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex® finish to give these valve springs the needed fatigue life to exceed the high demands of V-Twin engines from stock to performance
- FEULING® BEEHIVE® valve springs use a smaller lighter weight retainer which drastically reduces the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs
- Valve springs are a direct bolt-in replacement, no spring seat or rocker cover machining required up to 0.565 lift
- Springs will accommodate over 0.600" cam lift, but will require spring seat pocket machining on the cylinder heads to set correct spring open height
- Smaller lighter weight retainers which drastically reduce the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs
- Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics
- Kit includes: matched set of Feuling® High Load Beehive® valve springs, Ti retainers, machined spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with a spring loaded valve stem wiper system
- Seat lb/Installed Height
- 151 lb @ 1.475" (0.485" Lift)
- 144 lb @ 1.498" (0.508" Lift)
- 143 lb @ 1.501" (0.511" Lift)
- 140 lb @ 1.511" (0.521" Lift)
- 124 lb @ 1.562" (0.578" Lift)
- 120 lb @ 1.582" (0.592" Lift)
- 304 lb @ 0.990" open height
- Coil Bind @ 0.945"
- Recommended for +0.540 lift camshafts
- Feuling® BeeHive® valve springs must be installed at the correct open height, matching max lift to the open height spec of the valve springs
- Made in the USA
- Only recommended for large lift camshafts and race style engines as these valvesprings if not set properly will create extreme rocker arm deflection.
Specs
- Units: Kit
- Style: Ovate Wire Beehive
- Type: Valve
- Model: High-Load Beehive
- Riding Style: Street
- Product Name: Spring Kit
Frequently Asked Questions - FEULING PARTS - 1207 - Valve Spring Kit - High Load Beehive with TI Retainers - M8
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
