DYNATEK - DD2000-HD1EP - 2000-HDE PC-Programmable Digital Ignition Module
The DYNATEK DD2000-HD1EP is a quality module that installs right, performs consistently, and stands up to the demands of street riding. with black finish meets the quality standard street riders demand. Ignition format. Made in the U.S.A. PC programmability allows you to define a wide-open and part-throttle curve, rev limits, dead-cranking revs and rear cylinder offset. A separate tach output wire allows clean tach operation during rev limiting and when in single-fire mode. A diagnostic LED indicator is included on the back of the control module to assist trouble shooting and static timing. Sold individually.
Features
- A plug-in upgrade to the electronic advance ignition found on late model Harleys, these ignitions are micro-computer controlled, generating extremely accurate control over the entire ignition process
- Allow riders to tailor the advance curve and rev limiter to the specific needs of their particular engine; four built-in advance curves cover the needs of stock to highly modified engines over a variety of operating conditions; four independent rev limiter choices from 6000 to 7500 rpm set the exact protection level needed
- PC programmability allows you to define a wide-open and part-throttle curve, rev limits, dead-cranking revs and rear cylinder offset
- A separate tach output wire allows clean tach operation during rev limiting and when in single-fire mode
- A diagnostic LED indicator is included on the back of the control module to assist trouble shooting and static timing
- Made in the USA
- IMPORTANT: On any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon fiber-type suppression spark plug wires to reduce radio frequency interference. Use of copper wires may cause malfunction of the ignition due to severe electrical noise generated at the spark plugs. The original wire supplied by Harley-Davidson should be okay.
- Not for fuel-injected models.
- HDE systems are not compatible with Dyna "S" systems. Use HD1/HD2 systems only.
Specs
- Ignition Fire Method: Single
- Type: Ignition
- Connection Type: 7 Pin
- Product Name: Module
- Model: Dyna 2000 Series
- Color/Finish: Black
- Units: Each
- Ignition Fire Method: Dual
- Riding Style: Street
Frequently Asked Questions - DYNATEK - DD2000-HD1EP - 2000-HDE PC-Programmable Digital Ignition Module
How do I know if this part fits my vehicle?
Check the fitment information listed on this page against your exact year, make, model, and (where applicable) trim, engine size, or configuration. If your exact vehicle isn't listed, or you're not sure, use the product chat on this page or contact our support team before ordering - we're glad to help confirm fitment.
What does it mean if a product is listed as universal fit?
Universal fit means the product is designed to work across a range of vehicles, not that it's guaranteed to fit every one. Compare the listed measurements, mounting requirements, and connector or hardware specs against your specific vehicle before ordering, since some installations may need additional hardware or minor fabrication.
Where can I find installation instructions for this product?
General installation notes are provided above where available. For detailed step-by-step instructions, refer to the manufacturer's documentation included with the product, or use the product chat on this page for questions about difficulty, required tools, or whether professional installation is recommended.
What if I have more questions about this product?
Use the product chat on this page for fitment, specs, installation, and compatibility questions, or contact our support team directly for help before you order.
