Electric ATV, SxS & UTV Parts
About Electric ATV, SxS & UTV Parts
Switches are what turn a machine's added equipment on and off, and this group holds the ones made for UTV and ATV accessory circuits: light bars, roof lights, dome lights, horns, stereos and similar loads. Owners shop here when adding lights or accessories, replacing a worn or burnt-out switch, or organizing a dash with labeled, backlit controls.
Every listing here sits in one sub-category, Switches. The choices are the style (rocker or toggle), whether it is lit, the amp rating, and whether you want a model-specific plug-and-play power control system, which is listed for machines such as the Yamaha YXZ1000R and Polaris Ranger Crew XP 1000, with or without the switch panel. A switch only controls the circuit. Most high-draw accessories, such as light bars, are wired through a relay and a fuse, so follow the accessory maker's wiring diagram.
Brands here include Flip, Axia, Grote, XK Glow and Fire Power. Pick your machine in the Ride Finder at the top of the page for model-specific kits. For the rest of the wiring, see Electrical & Ignition Components, and for the loads you are switching, see Lighting & Lamps and Audio, Communication & Navigation.
FAQs on UTV and ATV accessory switches
What is a plug-and-play power control system?
The listings are model-specific kits for machines such as the Yamaha YXZ1000R and Polaris Ranger Crew XP 1000, with a six-switch layout and options with or without the switch panel. Plug-and-play means it connects to the machine's own connectors instead of splicing wires. Read the listing to see what is included.
Can I wire a light bar straight to a switch?
Only if the switch is rated for the full current the light draws. Light bars draw a lot of current, so most are wired through a relay and a fuse, with the switch controlling the relay. Follow the light maker's diagram and check the amp rating.
What fuse should I use on an accessory circuit?
Use the fuse rating given in the accessory's instructions, sized to the load and the wire. Do not fit a larger fuse than specified to stop it from blowing. A fuse that keeps blowing means a fault or an overload.
What are backlit switches for?
Backlit switches carry a small light so you can find and read them at night. Many are labeled for a function, such as dome lights, roof lights or a horn. Check the listing for the label and the lighting color.
Where do I mount several accessory switches?
Many machines use a model-specific mount plate or dash panel with cutouts for rocker switches. Check the listing for the machine it fits and the number of switches it holds, and use the Ride Finder to narrow it down.
